| Control Panel |
| In Auto mode the output corrected automatically in closed loop control to give the specified output Voltage. Provision to adjust the set value within the specified is also being provided. In Manual mode an increase decrease push button is provided to adjust the output voltage. |
| Emergency by-pass: |
| Provision to by pass is provided to switch on the output in case of emergency and at stabilizer maintenance time. |
Indication and Metering
Indications: |
| LED type indication lamps for the following are provided separately per phase. |
- Input high & input low
- Input on & output on
- Output trip
|
| Metering: |
| Digital Voltmeter with Input / output & phase selection switch is provided for measuring all individual phase voltage.
|
| Salient Features: - |
| 1. |
Adjustable Output voltage. |
| 2. |
Auto and manual operation possible. |
| 3. |
Over voltage cut-off. |
| 4. |
No waveform distortion. |
| 5. |
Low Internal Impedance. |
| 6. |
Wide frequency range operation. |
| 7. |
Fast correction rate. |
| 8. |
Specially designed IC based voltage-sensor. |
| 9. |
Output independent of load and power factor. |
| 10. |
High efficiency. |
| 11. |
Inbuilt surge protection (surge arrestors are imported from DEHN + SOHNE Germany). |
| 12. |
Manual by pass facility. |
| 13. |
Automatic phase correction provided |
|
